|FOUNTEK NeoCD3.0 RIBBON TWEETERS - SOLD IN PAIRS|
110mm ROUND AUDIOPHILE TWEETER PAIR
NeoCD3.0 ribbon tweeter is a high-performance component which is probably the best choice for building or upgrading your HiFi loudspeaker system. With a ;little crossover construction experience you can experience an incredible enhancement to your listening.
Thjis tweeter features:
A Super strong Neodymium magnet for very high efficiency.
Build-in impedance conversion transformer with ruler flat linear response.
Effective from 1.4KHz upwards due to the relatively low self-resonance.
Large area and very thin, Enforced-Sandwich Ribbon Diaphragm guarantees a high degree of signal fidelity, efficiency and a broad frequency response.
Low distortion factor, good power-handling capabilities, high linear impedance and linear amplitude frequency response to the infrasonic.
Broad frequency response range and FLAT impedance from 1KHz to 40KHz.
6mm thick, metal faced, black anodised, wide dispersion 110mm face plate.
Foam backed for mounting grommet. Fully shielded for TV proximity.
Many advantages of this driver give it a wide application.
The Manufacturers Recommended Crossover Frequency is to be no lower than 2.5KHz / 2nd-Order for rated power.
The wide bandwidth affords this ribbon tweeter to be quite suitable for two-way speakers systems.
High efficiency makes this tweeter suitable for multi-array speaker systems and also ideal for low power setups. The NeoCD30 sounds just beautiful with the A3500-SS of 35 Watts giving ample volume.
A higher crossover frequency will yield better power handling.
so the NeoCD30 can be inserted into more powerful multi-way setups as a high range "Super Tweeter".
Requiring high power? Then see also our NeoPRO 5i
For shimmering highs with incredible detail that will compliment any system.. Please consider the NeoCD30.
|Super strong Neodymium magnet for high efficiency|
|Build-in impedance conversion transformer|
|Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance.|
|Thin enforced sandwich ribbon diaphragm guarantees a high degree of signal fidelity and broad frequency response. |
|Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.|
|Flat impedance from 1,000 to 40,000Hz|
|Stones Sound Studio Recommend above 5KHz with a 3rd-Order crossover.|
|Ribbon material||Enforced sandwich|
|Ribbon area||480square millimeters|
|Gap flux||0.6 Tesla|
|Resonance frequency ||400Hz |
|Power handling||17W Normal, 40W Max|
|Recommended crossover frequency||2,500Hz / 2nd-Order|